How to Pay a Chinese Supplier Without Getting Burned

How to Pay a Chinese Supplier Without Getting Burned

Trademark

The email looked ordinary: same sender name, same thread as three months of order confirmations, one line — “Please note our new bank account.” The buyer wired USD 180,000 on a Friday. On Monday the factory called to ask when the deposit would arrive. Someone had cracked its mailbox three weeks earlier, and by Monday the money sat two banks away.

Nothing else in sourcing fails that quietly. Due diligence, a solid contract, an inspection plan — all of it assumes the money reaches the party you contracted with, in an amount that still leaves you leverage.

The short version: pay the contract party’s corporate account and nobody else’s; keep the deposit at 30% and release the rest against verified results; treat L/C as a tool for large first orders, not a habit; and stop looking for escrow, because it does not exist for China factory payments.

Three ways buyers lose money, in order of frequency

1. Paid the wrong party. Not the contract party, but a personal account, a “sister company” in Hong Kong, or an account introduced in an email. Legally this is the most expensive mistake, because you have not paid under your contract at all: your claim runs against whoever received the funds, on an unjust-enrichment or fraud theory, in proceedings you never chose.

2. Paid too early. Before inspection, before documents, before the goods exist. Before payment your remedies are strong — you can withhold tooling, withhold designs, walk away. After payment your only remedy is litigation.

3. Paid too much. A 100% prepayment buys a small discount. Buyers who never received their goods paid for it.

In short: payment structure is not a finance detail. It is where every other protection is either activated or wasted.

Rule 1 — The account must belong to the contract party

Three checks, five minutes, before the first wire:

  • Account holder name is character-for-character the contract party.
  • It is a corporate account — not a personal card, not a WeChat or Alipay collection code. Business funds routed through personal accounts give you no claim against the company, and such accounts are the first frozen when fraud investigations sweep a payment chain.
  • If the seller insists on another entity “for tax reasons,” the contract must say in writing that payment to the designated account discharges your obligation and the named party stays fully liable. Otherwise you have a payment and no debtor.

You should already have verified who you are paying — see our due diligence and factory audit workflow.

Rule 2 — split 30/70 and tie each payment to a result

StageSharePay it when
Deposit30%You sign the contract; the factory invoices in the contract party’s name
Balance70%Pre-shipment inspection passes and you receive a copy bill of lading

Adjust only for real reasons: a custom tooling fee inside the deposit means the mold clause must already be signed; long production runs justify stage payments against milestones; a first order from an unknown supplier justifies a lower deposit. What never adjusts: 100% before shipment.

In short: the deposit buys capacity; everything after it should buy something verified.

Rule 3 — Condition the balance on inspection, not on promises

The trigger is a passed pre-shipment inspection by your own inspector or a third-party firm, plus shipping documents. A photo of a loaded container is not verification, and “we will send the inspection report after you pay” is a sentence you should never accept.

In short: if the balance is not tied to a test, you have no quality clause — you have a hope.

Rule 4 — T/T discipline: freeze the bank details

Most T/T losses are not robbery; they are mailbox compromise, exactly as in the opening story. The defense costs nothing:

  • Bank details live in the signed contract annex, nowhere else.
  • Any change takes effect only on a signed written notice, verified by a phone call to the number stated in the contract — never a number from the email signature.
  • Two people approve outbound wires above a set threshold.

Rule 5 — L/C for large first orders only

Use L/C whenStay on T/T when
Order size makes one default catastrophicRegular repeat orders with a track record
Supplier is new and untested at that scaleStage-release structure already covers the risk
Your bank will check documents properlyYou cannot absorb discrepancy fees and delays

An L/C shifts risk to documents, and it does that well inside its niche. Outside it, a single typo in a beneficiary name turns your “secure” instrument into a second negotiation, and the factory prices the delay into your goods.

Why there is no escrow

Buyers keep asking for it. For China factory payments, a genuine B2B escrow — a neutral institution holding funds against inspection results — does not exist as a product. Platform protections such as Trade Assurance are not escrow: low caps, platform-decided disputes, and no reach into the direct deals where real money moves. What replaces escrow is the payment schedule plus the inspection trigger plus the account clause — a contractual escrow assembled from three ordinary clauses.

In short: do not structure around a service that will not be there.

The payment clause

“Buyer shall pay 30% on signing against the Seller’s invoice issued in the Contract Party’s name, and the 70% balance within 7 working days after (i) the pre-shipment inspection under Clause [X] passes and (ii) Buyer receives a copy bill of lading. All payments go by bank transfer to the Seller’s corporate account in Annex B, held in the name of the Seller. Payment to any other account does not discharge the Buyer’s obligation. Any change of account details takes effect only when the Seller gives a signed written notice and the Buyer confirms it by telephone at the number stated in this Contract.”

中文要旨:定金 30% 凭合同主体发票支付;余款 70% 于出货前检验合格并收到提单副本后 7 个工作日内支付;款项仅付至附件所列卖方对公账户,向其他账户付款不构成履约;账户变更须卖方出具签字通知、买方经合同所载电话确认后方生效。

Four red flags

  • “Pay to this personal account / WeChat — company account has issues this month.” There is no benign version.
  • New bank details arrive by email, especially with a lookalike domain or deadline pressure.
  • The beneficiary name does not match the contract party, and the explanation changes each time you ask.
  • The factory resists an inspection condition on the balance “for trust reasons.” Inspection is what creates the evidence trust would need.

Need help?

We set up payment structures, verify accounts and handle recoveries when money has already gone to the wrong place. If you are opening a new supplier or dealing with a payment that went sideways, talk to us.

Related reading

Sources (accessed November 2026): Civil Code of the PRC (contract and unjust enrichment provisions); PRC banking rules on corporate account use; market practice for China OEM payment terms. Platform protections described generally; check current platform terms. 

Frequently asked questions

Q1: How much deposit should I pay a Chinese factory?

A1: The market-working baseline is 30% deposit and 70% balance — enough to secure production capacity and materials without giving up your leverage. Raise it only for genuine cost reasons, such as custom tooling included in the deposit (in which case a mold ownership clause must already be in the contract), and lower the deposit for first orders with unknown suppliers. Never pay 100% before shipment: the discount offered for prepayment is funded by buyers who never receive their goods.


Q2: Is Alibaba Trade Assurance a safe substitute for a contract and payment structure?

A2: No. Trade Assurance is a platform protection, not escrow: coverage caps are low, disputes are decided by the platform under its own rules, and it does not reach the direct deals where substantial money moves. Use it as a layer, not a foundation. The foundation remains a signed contract with the counterparty verified, payment to the corporate account, and balance released against verified inspection results.

Q3: The supplier emailed new bank account details — what should I do?

A3: Treat it as attempted fraud until verified, even though the sender address and thread look genuine — compromised supplier mailboxes are the most common route for business email compromise. Under a well-drafted contract, account changes take effect only upon the seller’s signed written notice, verified by a phone call to the number stated in the contract itself (not from the email). If your contract lacks this clause, call your regular contact via a number you already hold, and get the change confirmed in writing with company chop.

Q4: Can I pay a Chinese factory’s Hong Kong affiliate or export agent instead?

A4: Only with contractual cover. If you pay an entity that is not the named contract party and nothing else was agreed, you have not discharged your payment obligation under the contract — your claim sits against the recipient, outside the framework you negotiated. If the arrangement is genuinely needed, the contract must state in writing that payment to the designated account counts as performance and that the named contract party remains fully liable.

Q5: Why is escrow not available for payments to Chinese factories?

A5: B2B escrow — a neutral institution holding funds against verified inspection results — does not exist as a real product for China factory payments. Platform protections are not escrow (caps and platform-decided disputes), and third-party “escrow” services offered by strangers in the supply chain are a known fraud pattern. What replaces escrow is staged payment against verification: deposit, milestone payments, balance conditioned on pre-shipment inspection and shipping documents, all written into the OEM contract.

Q6: I already paid the wrong account — can I get the money back?

A6: Sometimes, slowly. Options are negotiating with the recipient, reporting to the police where fraud is apparent, and civil proceedings — potentially with asset preservation to freeze the receiving account, which requires a court decision and speed. There is no bank-level recall that reliably works for international wires to China. This is why every preventive step — payee verification, corporate account clause, callback protocol — is worth its cost.

Disclaimer: This article is general information about PRC law, not legal advice, and no attorney–client relationship is created by reading it. PRC law and local practice change frequently — confirm before relying on this content. © 2026 Chibridge Law Firm / China Law Help.

Related Posts